Hifonics BXI 1606D Car Audio Amplifier "fuse amp" Questions

...amp fuse on the wire that runs to your bat. There are fuse blocks that you can put 4 40amp fuse and theres the high dollor ones that you can put all the way to 200amp. When you trun up your amp its ...

amp fuse in the fuse holder would I need to put a 60 amp fuse into my fuse holder or would it be alright to keep the 100 amp fuse in? try a 60 amp fuses if it doesnt blow when you crank it up it safer

...amp fuse. If the amp blows the fuse when it powers up, the outputs are almost certainly the problem. Don't try it with the two 30 amp fuses. The smaller fuses will provide more protection for the ...

...amp fuse, so connect it to a 20 amp fuse 2. you have a connection issue, where something is shorting out 3. you are pushing the amp or car to it's limit with how loud you put it, and thus blowing it, ...

amp fuse i have logic soundlab 1820 amp. there is two fuse holders on the amp its two channel amp. i need to know what size fuses i should put in the amp, and what gauge amp wire should i use, and ...

...amp. The fuse on the P200.2 amp is a 30A fuse, and it sits right next to the power, ground, and remote wire connections on the end. Pull the fuse out and see if it's blown. You should also check any ...

amp and shorting it out which will blow the fuse. Use the incorrect wiring of subs to the amp, you'll blow fuses and damage the amp from it turning off consistently. The amp should be running at 2 ohm

...use the same amp fuse as on your amp, nothing larger. The fuse just keeps the wire from overheating/shorting and causing a fire.. IF you amp has a 30 amp fuse then you use a 30amp fuse off the ...

...amp fuse it worked for about and hour and started blowing the 30 amp line fuse. i replaced the line from 8 to 4 gauge and installed an 80 amp line fuse. this worked for about an hour and now it is ...

...Crystal PB781X 2ch MOSFET). it is missing the fuse. what fuse does it require? 25 to 30 amp fuses are the most commonly used fuses in any amp and since yours is a 1000w amp, I would use the