JBL CREATURE II Computer Speakers "plug back" Questions

...plug on the back of the computer. Again, make sure that you have the power supply that came with the speakers. Do not plug the power supply in until you connect the 1/8 plug from the speaker to the ...

...plug into the back of the computer. Some of them have a red cable as well and that cable would normally go into the back of the computer by the green cable. The color on the back is normally a maroon ...

...back of a desktop PC. 4 Plug the speaker transformer into a surge protector and the surge protector into a wall outlet. 5 Turn the on-off and volume control knob clockwise on the front of the ...

...them correctly. Can you plug in the speakers to the monitor? Or do you have to connect them to the back...Also, what does the plug look like? Thanks, Tonia its a green round plug on the back of the ...

each plug theyll fit in on the front and back, or sides of your computer, if not, chances are you have a broken soundcard... or a software conflict, did you install anything lately, try uninstalling..

No there is absolutely no sound Are the speakers plugged in, turned on? Restart the PC. Unplug the speakers from the PC and plug them back in. Unplug the power from the speakers and plug them back in

...plug the speakers back in to the back.... use the green plug In the greeen socket near the blue and pink one. Honest I am not joking. 1.Turn on the speakers and turn them up. 2. go onto the internet ...

...back into the correct socket. The plug is coloured green and therefore should go back into the green socket. you have probably plugged it back into the blue or pink sockets. Use a torch to check that ...

...back of the bigger base unit, then connect the other plug to the computer. The connection is usually at the back of the computer but you may also have a connection at the front. On the back of the ...

...back). Plug each little speaker in to the red and white plugs located at back of the largest box/speaker. Set your speakers control next to you, plug the power cord, turn on your speakers systems, ...