...plastic mounting bracket, and then reattach to the front of the washer. 8. Now, when you get the reinstalling the rubber door boot, you may want to get the assistance of a second pair of hands as it ...
Question about Estate Washing Machines
...plastic crossbar by reaching behind and squeezing 2, one on each side, clamps together to get out of way. (can get to parts much easier by doing this) also disconnect (3) rubber boots from bottom of ...
...plastic retainer bracket. Reach in behind front panel and carefully remove the door latch from this bracket so you can access the wire connectors.7. Remove wire connectors.8. Re-install wire ...
...plastic and it is common for them to go bad. It is not a repairable unit and will have to be replaced. The part number for the pump is 3296 and costs about $40. Also take a good look at the drain ...
Question about Kenmore Washing Machines
...plastic piece unscrews (counterclockwise) to reveal a filter. Remove all the coins, buttons and other junk from this area and from the rubber hose that you can see after taking the filter out. You ...
115 questions posted
Usually answered in minutes!
99 Questions
31 Questions
24 Questions
20 Questions
15 Questions