...mtx 15 5500 sub woofer dual voice coil any one know i have tried several ways there are several ways, it all depends on the bass response you want, and with that, it also changes the ohms in the amp. ...
...bass ( 1/2 - 4 seconds) mostof the time it worked was when i was decelerating...i just checked all the wiring from the sub and amp and nothing was looses, any help? PS if it helps I have 2 10''MTX ...
no audio device in the system i need to install an audio device in my computer as it has been formated recently....and no sound can be detected without that..what shall i do to get back my previous ...
Question about MTX Car Audio & Video
...Mtx road thunder boxes , I have removed the blown subs and replaced with Pioneer 10" TS-W25-1R's.while the bass is good, I am noticing some distortion in the mids & highs. I have a set of Clarion ...
...mtx thunder 8000 15s with the mtx 7801 amp and currently running 2 dual vented 15 inch boxes, what is the best box to use with them? Vented?sealed?ported thanks It really depends on the music you ...
...MTX T9515-44 sub with each coil wired to the amp in its own terminal although this amp only has one channel (500w rms x1 @ 4ohm, 900w rms x1 @ 2ohm). This is the tricky part: two 4ohm voice coils ...
mtx thunder 8000 sub hooked to an alpine mrp - m500 in a box i built myself. when bass hits certain notes the sub makes a weird rattling sound like something is loose. i dont know if it's the dust cap
...MTX Thunder 1501D is stable at 1ohm and outputs 1,500 watts RMS into that impedance. An L7 with 2ohm DVC's would present a 1ohm load if wired in parallel and would allow the amp to produce more power ...
189 questions posted
Usually answered in minutes!
102 Questions
72 Questions
42 Questions
48 Questions
34 Questions
