Lanzar VIBE266 Car Audio Amplifier "output voltages 4 wire capacitor" Questions

...output is 12.7 with the car off, and 14.4 with it running. Everything is brand new. (Rockford Fosgate 4 gauge wiring kit, Universal RCA adapter, Lanzar Vibe 266, and a Power Acoustik FUBR-12) Any ...

...4 ohms each voice coil, if you parallel those together it is now a 2 ohm load. It is very important to stay with in the ratings of your equipment, otherwise you can blow up your amp, short your ...

...4 guage wire do i need to go bigger? Try using a capacitor and make sure you have a fused (+) directly to the battery post that is routed as short as possible. Ground wire should be short enough from ...

4" dvd and when i turn it so far up the amp will click and the output stops but it will click back on for a sec before clickin back off i nocited if i turn the bass down on the stereo i can turn it up

...4 mids amp is mounted on my back seat and the next mids amp is mounted on the sub box. When I'm playing my 4doors are open and the seats are down the trunk is poped so there is ample cooling for the ...

...4 ohm configuration, which is a combo of parallel and series wiring. This when reconnected and with fresh fuses in my amplifier provided a different but equally disappointing outcome. It worked for a ...

...4 OHM OR HIGHER READING, IFTHATS NOT ISSUE MEASURE B+  for constant 12.3 or higher voltage. If low or varying purchase an after market add on capacitor kit. Finally if never produces audio you ...