Lanzar VIBE266 Car Audio Amplifier "one sub" Questions

Ad

Question about Lanzar Car Audio & Video

2 Answers

...one sub but has no bass with 2 my lanzar vibe286 is a 2 channel amp but only sounds good when one sub is hooked up. when i hook both up they hit hard but have no bass...one is louder than both but it ...

Ad

...amp had 2 30amp fuses on it one for each channel but I ran everything out of one channel. Have you tried another sub ? Make sure your ground is good. Sounds like a shorted out coil on the sub. Bad ...

Ad

Question about Kenwood Car Audio & Video

1 Answer

...sub, Can i hook just one of these to mono kenwoo amp or do i have to hook up two? No, the sub is dual 4ohms...meaning if you parallel the positive speaker terminals and the negative speaker terminals ...

Question about Planet Audio Car Audio & Video

1 Answer

...one jl audio 12 inch sub to my 400 watt planet audio amp it sounds good. but when i add the second 12 inch sub the sub power cuts way down and the sub sounds really bad like they are busted or ...

Question about Sony Car Audio & Video

1 Answer

...one sub into each out put if so sure you can, but the 2 ohm sub will see more power & it will be louder. If you are wiring them in paralell to one output the load will be too low (1.33 ohms)& ...

Question about Kenwood Car Audio & Video

1 Answer

...per sub. Hook one up to the left channel of amp and one up to the right....This should work for you. If your amp plays for a while then goes into protection mode, then it cannot handle the ohm

Question about Legacy Car Audio & Video

2 Answers

one sub in parallel (tie both "+" on the sub to each other and both "-" on the sub to each other), then connect that sub to one channel of the amp. Repeat this process for the other sub and connect it

Question about Rockford Fosgate Car Audio & Video

1 Answer

...one sub to my amp, it hits really hard, but when i plug the other one in it sounds much worse. How do i make both subs hit as hard as they used to? one of your subs is wired out a phase for your amp ...

Question about MA Audio Car Audio & Video

1 Answer

...one Sub to each output and see if the protect LED goes out. If it does then you should have sound at the subs. If not check that you have the sub output enabled on the HU some head units do not come ...

one is scratching what you could be getting feedback from the other as well so check each individual voice coil. Hopefully you have warranty. Double check all connections .A thumbs up would be greatly

Not finding what you are looking for?
Lanzar VIBE266 Car Audio Amplifier Logo

34 questions posted

Ask a Question

Usually answered in minutes!

Top Lanzar Car Audio & Video Experts

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1212 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66963 Answers

Are you a Lanzar Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...