MTX Thunder 2-Channel Amplifier 502 Car Audio Amplifier "blue" Questions

amp only works in tuner mode i was reading somewhere to reset deck. Or change blue with blue and white wire but i dont have blue and white change the remote cable to the other radio blue wire. one ...

WHERE DOSE THE BLUE WIRE GO IT WAS FOR WHERE DOSE THE BLUE WIRE GO IT WAS FOR Blue wire is the Remote power switch. Supply this wire with posive power and it turns the amp on. Its only a "Switch" not ...

...radio but not with cd or USB, even though the display says they are working (cdx-gt590ui) use the blue/white wire to turn your amplifier on. the blue wire is antenna remote turn on, the blue/white ...

kewood 352u headunit to kenwood KAC 9152D amp. Which wire do i use for my remote wire? the blue wire or the blue/white wire? blue

The blue light is flashing The blue light is flashin. it has power and everything is tight and plugged in. no fuses r blow but the blue power light that is normally always on is now flashing ...

...cd the amp and subs dont work. Its a sony radio and a pioneer amp You have the amp connected to the blue wire on the radio instead of the blue one with the white stripe. The blue one is the power ...

...wire is also good Check to see if you have the right remote wire hooked up some radio have two blue wires one is blue and white the other is just blue. And for sure check the ground and make

no power to subs Hey, i have a legacy blue amp 1000Watts i hooked it all up and the lights came on so it works and it powers my 6/9's bc they are hooked up to the head unit and the little blue wire is

Where does the REM wire go once hooked up to the Amp? it goes to a blue/white wire on aftermarket radio's and if not available then a solid blue wire and when both are present always use the ...

what other wire do i connnect from stereo to amp besides the red 1 ? blue? or yellow? can u email me the wiring diagram? The blue wire is normally the 'switch on' wire for the amp blue wire goes to ...