Fisher and Paykel 24 in. DD603H W Built-in Dishwasher "dishdrawer buttons working" Questions

dishdrawer - the top drawer appears to have lost power mid cycle and the lid has not retracted - no led display - no response from the buttons. The bottom drawer functions ok. I have tried turning the

...does not totally drain out after a cycle, any ideas? Thanks This applies to all DD601 and DD603 dishdrawers. U3 is either one of the following: - Drain pump is blocked. - Drain hose is blocked. - ...

...module.

...dishdrawer draw stuck after beeping Ds603 Was running and started continuously beeping tried opening drawer was stiff and now stuck open Tried resetting by unplugging several times no luck Display ...

Dishdrawer: Does not start, just beeps once The bottom drawer works fine. The top drawer will not start. When I press the start button, it gives a few short beeps, then nothing happens. The lights ...

Good morning, I have a F&P dishdrawer ds605i (i think!) single drawer intergrated front. I dont know whats happened to it. The last cycle it decided not to empty the water out, so i manually ...

...dishdrawer is working ok, it is likely the controller on the top drawer is either faulty or sensing some incorrect signal. If pressing any of the panel buttons makes no difference, then most likely ...

Top draw 'locked' no power The top draw of my dish washer has 'locked' with a load of hopefully clean dishes inside. It has been 'locked for some 6 months and I have no idea how to free the mechanism.

...dishdrawer model DD603, Australian model. Failling that what I really need to know at present is how to use the lock button - just pressing it doesn't seem to work. I need to be able to stop my ...

...buttons on front were pushed. Bottom's backlight works fine. Dishdrawer still works, just backlight is off when drawer "on". There is some reason the LCD needs to be reset. Un plug the cord. Remove ...