Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher "plug melted" Questions

melted, so I just replaced the solenoid only to find the pump bearing was drying out. So for the hassle and cost, I replaced the whole pump assembly, now it's quiet as a mouse, and works fine. This is

it is leaking because the heating element melted away the tub. Is there a fix to salvage the tub by plugging the hole? Yes repair the hole with Epoxy filler

...dishlex. its ellectronic. is there a reset or does the heater ellement need replacing? cheers Unplug your dishwasher,then remove the front upper control panel.You will see a series of plugs.Note ...

...melted pan. What can we use to plug it? What caused this problem? Model #665.16559202 this is not more than 3 years old. Looks brand new except the hole burnt in corner of pan by the element ...

...store. The brand I use is called dishwasher magic, you place it in the lower rack and a wax plug melts mid cycle, I would buy atleast 2 of them. Dishwasher soaps have changed and you film is ...

...the end of the cycle. You are not getting enough water in the machine. The inlet valve is probably plugged with sand or something of the sort. You will need to replace the inlet

...plug after about60 minuts and stop working and turn off Open the front door panel and check to see if your wires have melted into the black spray on insulation. You need to free them and check to see ...

...melted wired where they connect to dishwasher. To check/ correct Turn dhishwasher off at breaker. Unplug dishwasher also if you can. The bottom of your dishwasher on the outside in front at bottom. ...

...dishes? Using too much soap is worse than not using enough. Over time, soap scum will build up and plug the internal plumbing of the dishwasher. Often, there is simply not enough water in the ...

plug it in , It sparks... Check the wires and wire nuts inside junction box at the bottom right of your dishwasher, behind the toe-kick panel(s). I'll bet 1 of the wire nuts melted and the wire(s) are