Question about Fisher and Paykel Dishwashers
...open and lift it up at the front (this makes it easier to remove the wiring cover from the rear of the tub). 9.9.6 The wiring cover may now be carefully moved forward to release it from the rear of ...
...open and closing If all seems OK then replace bottom cover making sure water spill connectors are replaced first. 3. To replace the switching relay requires basic soldering skills. From the front of ...
...front cover and find the grey wire just above the door hinge. You do not need to even remove the machine. I had the same OE error, tried everything with the drain hose to remove blockage, shaking, ...
front panel, but I removed it so that the skin would not be pulling on any wires. I then wrote (with an indelible pen) a number on all the connectors to the control box, noting that one of them has to
...cover plate of the dishwasher (there are screws at the back, top and front of the machine), you expose a large flatish plastic device about 150x300x15mm that is responsible for dividing up the ...
...Open door and wipe up excess detergent from the door and tub 8. Flush remaining detergent off by pouring water on the door and tub where there is detergent residue. 9. Remove SmartDispenser cap and ...
...open door switch, or a faulty component in the heater circuit. The most common cause is the door switch not closing properly. This can be due to a loading issue or a latch issue. If upon visual ...
955 questions posted
Usually answered in minutes!
201 Questions
174 Questions
104 Questions
87 Questions
68 Questions