Power Acoustik TS980-2 2 Channel 980W Synchronized Lightning Pulses Plasma Sphere Amplifier Car Audio Amplifier "replace crossover" Questions

Ad

Question about Kicker Car Audio & Video

1 Answer

...CROSSOVER IS PUSHED WITHOUT CARE, IT EVENTUALLY STARTS TO HAVE POOR CONTACT. THE CONNECTOR MUST BE REPLACED. YOU SHOULD BE ABLE TO FIND MY ADD FOR REPAIR UNDER ZIPCODE 70360. I AM NEW TO THIS FORUM ...

Ad

Question about AudioBahn Car Audio & Video

1 Answer

replace they just blow out again without turning on the radio Sounds like you have shorted output transistors or IC'S There is one test is to disconnect all the speakers and see if they still blow. If

Ad

Question about Infinity Car Audio & Video

1 Answer

...flash back and forth. I turned out to have 2 bad output transistors on the right front channel, I replaced them and amp works great now. Then when I was doing final testing I switched the crossover ...

...REPLACE CROSSOVER, BASE BOOST AND GAIN CONTROLS THE POTS ARE NOISY AND CLEANING DOESN'T HELP. Locator #'s VR1, 2 and 3 the pot #'s are on the sides of it and u can just find another with the same ...

Question about MTX Car Audio & Video

1 Answer

replace it with,the amp works if short out the two connection spots but I don't think the crossover will work properly without it, you need the resisitor, it keeps the machine from basically frying up

Question about Car Audio & Video

2 Answers

...you have a defective switch or a broken solder connection. If the amp is new, return it for repair/replacement. Don't break the warranty seal if it has a warranty. broken crossover switch or damaged ...

Amp turns on, no sound comes out, replaced output transistors My amp stopped working awhile ago and I've finally decided to fix it. I was wondering if anyone had the schematics for mrd-m1005 or if ...

Question about Pyle Car Audio & Video

9 Answers

Amp

...a stock head unit, that is your problem filterpot for the low pass crossover is going bad.Have it replaced or use the head unit sub

...replace the unit. Or circumvent the filtering problem with either an in line RCA Filter or an electronic crossover. TURN POWER TO AMPLIFIER OFF. There is a hpf lpf setting on the amp. Its a square ...

Question about Panasonic Car Audio & Video

2 Answers

I have a Panasonic EAA046B amp connected to a Polk Momo speaker system installed on my 2006 Sea Ray boat that was factory installed. Last week when we turned on the stereo all we got was short basey ...

Not finding what you are looking for?
Car Audio & Video Logo

2 questions posted

Ask a Question

Usually answered in minutes!

Top Power Acoustik Car Audio & Video Experts

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1212 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Power Acoustik Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...