Question about GE Washing Machines
quot;water level sensor" or is it a different part? same part different name the pressure is obtained by as the water level rises in the tub the air trapped in a small hose attached to the switch
...quot; then stop working. Hello & Welcome to FixYa FH error is displayed when the control detects no water entering the machine. To clear this error press and hold the PAUSE/CANCEL button twice. ...
Question about Fisher and Paykel Washing Machines
...water." No problem with water during the fill or spin cycles, only during rinse. In the rinse cycle it will use cold only to rinse with. You need to see how fast the water is going into the ...
...quot;Water tap closed". Resetting the machine often solves this problem! Water temp set to only 30Degrees C and water pressures known to be on the low side. Have checked filters and pipes from ...
...quot;long fill - no water or insufficient water supply... sounds like a pressure switch issue not sensing the water in the basket... do you agree? I agree. here are some things to check for • Make ...
...quot; Thank you for using FixYa. Code E02 means that the machine is taking too long to fill with water. Either the water pressure is low or the inlet valve filter could be blocked. Try and increase ...
quot; It's an HE washer does not fill with enough water. They are blaming my water softner but I get the same results if it is bypassed or not. I Dug the silicone out of the one closest to the end
...quot; beeping.... what should I do? Hello there and thank you for choosing fixya When your washer displays error LF , it is due to low water pressure, slow or continuous fill.All washers are designed ...
Question about Fisher and Paykel Washing Machines
...quot; in the display No water detected entering machine or Pressure switch trip not detected. If after 30 seconds the control does not detect water entering machine and then valves will be turned off ...
Question about KitchenAid Washing Machines
...quot; flashes? What is the problem? DW 7/31/11 Hello & Welcome to FixYa FH error is displayed when the control detects no water entering the machine. To clear this error press and hold the ...
247 questions posted
Usually answered in minutes!
1,514 Questions
88 Questions
87 Questions
45 Questions
22 Questions