Fisher and Paykel IWL12 Top Load Washer "broken agitator" Questions

broken top agitator I have a Kenmore 80-series washer (10-15 years old) with what appears to be a broken agitator. The top portion of the agitator now spins freely (after weeks of a rachety-like sound

inside of it hasn't been broken or stripped out. The spline keeps the agitator locked to the shaft, and it sounds like there is a problem with this security. If broken, replace the agitator. Good luck

...replaced? GEARCSE NORMALLY HAVE A SMALL LEAK .BUT IF LEAKING MAJOR REPL/JUST SCREW ON BACK THE AGITATOR MAKING ANY WEIRD NOISE, USUALLY WHEN BROKEN COUPLER ,,SHOULD BE SIGNS OF GEARCASE BROKEN ...

...broken. If the agitator cannot be easily turned by hand, there is likely a piece of clothing jammed underneath and the agitator will need to be removed to clear the jam.  The video below will ...

...back and forth about 5 degrees. I have removed the agitator from the spindle and checked it for broken teeth. There are none. is this a whirlpool/kenmore top loader if so your drive coupler is ...

...agitator dogs are broken. If you pull the top pieces from the agitator you can see the agitator dogs and tell if they are intact or broken. If they are good, the transmission might be bad. The only ...

...agitator was broken 2 weeks ago, one wing of my agitator was broken off. with many washings since, today I find water running on floor in front of machine, blue like the denim wash water. cannot find ...

...Agitator doesn't agitate. Fills, spins and drains OK. Unfortunately, that sounds like a transmission issue. Power is getting to the trans, or it wouldn't spin, but the other part of the trans that ...

won't agitate Broken coupler, broken agitator, objects in pump, broken lid switch? Click here

Broken agitator Hi, The washer has a splined agitator drive bell. There appears to be a threaded "bolt" or shaft that goes up thru the agitator from the bottom, I'm assuming there is a nut on this ...