Fisher and Paykel GWL11 Top Load Washer "permanent press setting" Questions

...Permanent Press sitting-buzzer goes off in all others HELP! My Whirlpool Thin Twin dryer only works in the permanent press setting. When I try the other setting the buzzer goes off at every ...

...permanent press cycle. Maybe there is manual online for it. I send all mine to the dry cleaners and have them dry cleaned! Use the 'synthetics' or 'acrylics' setting which is the new name for ...

...permanent press cycle only the spin cycle isn't spinning enough. Clothes are extremely wet must run another spin to get out the water. Thts right....the permanent press cycle my only spin at 600rpm ...

...Will the temperature in the dryer when set to the perma press cycle be higher or lower than the delicate cycle? the temp of permanent press cycle is a higher temp then the delicate cycle.

...Permanent Press cycle, it will not go into final spin. Spin works on all other settings. I now use "Normal" instead of "Permanent Press" and it spins fine. I've also tried resetting by unplugging the ...

...for a few seconds until you hear two quick beeps. Select Permanent Press cycle. Select HOT wash. (Yes, you can do this in this mode.) Press Favorite again to store the selections. It really

will not finish spin cycle Check to see if it has a Drip Dry or permanent press setting. take it off this setting.

...permanent press to check water level. Paused it and checked it. changed setting to drain and spin. Now when i press start, the lights go out, and no spin light comes on, and it just sits there. if i ...

permanent press keypad to change this setting each press changes it by one increment keep pressing it until it goes back around to 600 Then close your service hatch and the machine will be set to work

...starts draining. From your symptoms it sounds like your control board that is bad. Did you check it on another setting, i.e. permanent press to regular or delicate and see if the same thing