Fisher and Paykel GWL11 Top Load Washer "oobe" Questions

Ad

Question about Fisher and Paykel Washing Machines

1 Answer

I'm not exactly sure of the model, however it is code 43 Washing machine digetal read-out shows code 43. 43 error is the 'out of balance' fault code. The oob switch is under the motor controller board

Ad

Question about Washing Machines

1 Answer

error code 43 has come up . looking @ possible solutions Error code 43 is for the Out Of Balance (OOB) switch. The OOB is situated under the Motor Control Board which is accessed by the 2 screws at ...

Ad

Question about Washing Machines

1 Answer

I have a F&P Smartdrive excellence 7.5kg when turned on the water stops and starts then the machine stops and continuously beeps. the lights that stay on are the 3rd, 5th, 7th and 8th on the wash ...

Question about Fisher and Paykel Washing Machines

1 Answer

Washer constantly goes out of balance GWL11 washer, 4 yrs old. Goes out of balance 1 out of 3-4 times. Flannel sheets, flannel shirts, towels, fleece, jeans all mess it up. Pull all out, move around ...

Question about Fisher and Paykel Washing Machines

1 Answer

The diagnostic mode says that the problem I am having is that the off balance switch is stuck on or the harness is unhooked. The manual also sys the the swithch is located on the right rear corner of ...

Question about Fisher and Paykel Washing Machines

1 Answer

code 43 what is the meaning of this error. the machine start to fill with water, goes into sensing load does this cycle 3 times then stops. What could be the cause of this problem. is it expensive to ...

Question about Washing Machines

1 Answer

My machine stopped and made a constant beeping while the 3rd, 5th, 7th & 8th lights across the top remained on. What does this mean???? It sounds like this is a Fisher and Paykel-made top load ...

Question about Fisher and Paykel Washing Machines

2 Answers

Fisher and Paykel GW703 OOB Switch Fault I've diagnosed a OOB (out of balance) switch fault with a GW703 washing machine from the error code 00101011. I've checked the switch and it moves freely and ...

Question about Fisher and Paykel Washing Machines

1 Answer

what is code 43 Code 43 is Out Of Balance fault. Most probably because the OOB switch has failed (not uncommon) or the trigger arm has become jammed over the bowl. The OOB mechanism is under the main ...

Question about Fisher and Paykel Washing Machines

1 Answer

fishe paykel washer will not spin Washed blankets and machine was shaking/vibrating, bouncing vigorously. I redistributed the blankets but now the machine will not spin The main bowl may have jumped ...

Not finding what you are looking for?
Fisher and Paykel GWL11 Top Load Washer Logo

1,828 questions posted

Ask a Question

Usually answered in minutes!

Top Fisher and Paykel Washing Machines Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Fisher and Paykel Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...