Fisher and Paykel GWL11 Top Load Washer "hot tub eco" Questions

...TUB IS FILLED WITH WATER WHEN COLD IS SELECTED. NEW MACHINES WILL USE BOTH THE HOT AND COLD WATER VALVES TO FILL THE MACHINE. THEY DO NOT WANT YOU WASHING WITH STRICTLY COLD WATER AS THE DETERGENT ...

hot Washer shut itself down with a tub full of water/clothes. I restarted and it shut down again, with a little water leaking onto floor. Tried again in hope of draining the tub. It began to pump, but

...hot" and see about the sock. I found one of my husband's socks so far down in the tub bottom that I couldn't see it when I looked between plastic outer liner and wash tub. Had to remove black ...

...water from tub, then tipped it back to find that motor. look at my issue "eco smart won't drain, smells hot" to see how to remove that unit. very easy and motor/drainage is one unit to buy from

...in the coil, it will get hot and shut down. Bail out any water that is in the tub currently, and inspect that pump ASAP. if you continue to use it like this, you risk burning out the motor

...hot". It could be something clogging drainage area at very bottom of the tub. I couldn't see the sock that was stuck in my FP's drain when I looked from the top between the white outer tub and the ...

...tub for sock or something else that is lodged. Look at my post on "eco smart won't drain, smells hot" for instructions on removing the black motor/white plastic housing from bottom of washer. I had a ...

tub every week, switch to washing your whites in hot water with a little bleach to keep them brighter. This will kill bacteria in the washer in the process. I hope this helps you. "Thanks for Trying"?

hot and cold water hoses from the household plumbing. If either hose is leaking, tighten it or replace it, as appropriate. Main tub seal - The main tub seal is located between the transmission and the

...tub area where i found the sock. More explicit instructions on how to remove this unit are on my post "eco smart won't drain, smalls hot". Good luck! Ann I had this same problem and it turned out to ...