Fisher and Paykel DEGX1 Electric Dryer "remove top front" Questions

...top of the dryer.Remove the Front Panel.At the top of the front panel you will see four screws, remove these.Open the door and remove two screws that are near the lint trap.lean the top of the front ...

...remove the top of my dryer to have access hi thanks for the question .2 screws at the bottom of front panel remove remove front 2 3/8 screws under the top at front remove & lift top .thaks the ...

...remove top. Remove the front control display board by removing the 2 screws and unsnapping the control panel. Remove the 4 top screws hold the front panel and the 2 bottom screws in the door frame ...

...top cover is held on each side of the cabinet by two hold down brackets. Locate and remove the 5/16" hex-head screws holding each bracket then swing the bracket to the outside and unhook it from ...

...remove the top paenl and then remove the drum and you would be able to see the belt. You can disassemble it by the following procedure-- Drum Removal / Roller / Glide Access-- Disconnect power supply ...

...holding front panel 2 side panels. They are at top front of side panels, inside. Pull front panel out at top and pull up to remove front panel. Put belt around drum with grooved side toward

...remove top of Maytag dryer replace belt The top panel can be lifted only after the front panel is removed. Open the door and remove the four screws located vertically along the inside lip of the door ...

...Remove the top cover.
2. Remove the lower cover.
3. Remove the door.
4. Remove the front drum frame.
5. Remove the four screws that secure the front panel to the side panels.
6. ...

...top off. Remove 2 phillips head screws at 5 and 7 O'clock position behind door. Remove screws holding top control from top corners. Pull top of control panel loose from retaining clips along top. ...