Fisher and Paykel DEGX1 Electric Dryer "broke door cause heat work" Questions

...door switch assembly and just the lever. Check your model for more details. 3. Thermal fuse Most dryers have a thermal fuse, which burns out when the dryer overheats, in which case the dryer will ...

...broke just blowing cold air were is the heating elements location on that dryer in front panel or back and what do thermostats look like, Check your Wiring Often the main wiring connection from the ...

...broke and in need of assistance. Thank you..... Distraught Mom ALWAYS UNPLUG YOUR DRYER BEFORE ATTEMPTING TO DO ANY WORK ON IT. Check to make sure you are getting full 220 Volt power to the dryer, if ...

...broke. replaced thermal fuse and themostat .now what? Hi mikedissnts... Here are a few things to check: ALWAYS UNPLUG YOUR DRYER BEFORE ATTEMPTING TO DO ANY WORK ON IT. Check to make sure you are ...

...broke and shorts out on the housing. This would cause the element portion that is shorting out to stay hot and not cycle with the thermostat. Does the dryer try and heat while the timer is off? Have ...

...door switch is good. when i push the play button, i hear two clicks in the control box above the drum. if you are facing the unit, it is on the left side mounted in the top. that is the only thing ...

...broke. Sounds like your problem may be with the heating coil. Remove the back/or front just under the door of the machine and try to locate the air duct going from the blower to the drum. Normally ...

door of the machine and try to locate the air duct going from the blower to the drum. Normally inside/outside the air duct you will find the heating coil and the thermostats/thermistors. Once you have

door switch open.3. Bad Start Switch - If the start switch does not toggle close or stay closed when released, the dryer will not start.4. Bad Timer - If the timer does not function the dryer will not

...broke or off can i take apart dryer to check or do you recommend a common fix? Sounds like you have two problems #1... ALWAYS UNPLUG YOUR DRYER BEFORE ATTEMPTING TO DO ANY WORK ON IT. Check to make ...