Cambridge Audio Azur 340A 2-Channel Amplifier "sound works preamp" Questions

preamp/tuner. When the sound is turned up (not incredibly loud, It's handled a lot lo I don't know much about sound equipment, but I have a Carver Premier THX 5 channel amp and a Carver CT

...will it work without one? If so why is it after I properly hook up all the wires is there no sound? Even if Mackie Board look properly hook up , recheck again.these should

...works fine except when left on for an extended period of time it makes a popping sound through the output stage. I found out through the Carver Audio forums that metal shavings inside the case are an ...

...sound att all I suspect the balance pot is defect. Is this a common issue with this amp? Best regards Kenneth Persson i) It is possible that one of the electrolytics has been put in with wrong ...

works great with CD player , but with turntable the sound is poor when volume at highest Hi. Does the amplifier have a dedicated phono input and are you using it? If not then you will need an amp that

...mic, then it will crackle and makes weird noises in the manner you describe. Other than that it sounds like you have a failing op amp in your preamp. This sort of repair work is not

...sound from my nad t175 preamp connected to a nad t973 (7 ch.) regardless of the media - rca, hdmi, et al. The fuse in the amp is fine, all the lights are working. Regarding the t175 i can see ...

preamp & then to the audio input on the back of my computer but when I play a record nothing happens. This setup worked fine on my old (xp) computer. Check the control panel, it might be set wrong

...works perfectly It sounds like the preamp section is working but the power amp is not. Look at the power supply section and see if it is getting power to the power amp and if ok check the power ...