HP Officejet 6500 All-in-One Printer "change lights type" Questions

...change to the security type (none, WEP, WPA, or WPA2 personal). -A change to the security network key/passphrase. -A hard reset of the router followed by entry of security values that are different ...

...is not a power supply problem change paper type to card stock/thick/letterhead etc to suit then machine will adjust temp to suit.. ie file, print properties paper type. 50.2 fuser error replace

...TYPE. Change it from GAP or WEB to MARK. This will turn on the reflective sensor and then the printer will index from black mark to black mark. Be careful though...setting in the printer driver ...

...type, pay attention to "quality" of print - make sure you change it from economy, text, b&w, etc. to "photo" if needed. Most changes are the volume of ink used on the paper types. Failure to set ...

type and you can change it right away.) But main thing (job) that you have to do is, put paper information direct to printer information panel, because your main problem is that printer have different

Dell 110 Printer Problem - Just changed the toner but the type is light. The toner is new. What could be wrong? Quite a few laser printers have a toner save button to conserve toner. That will cause ...

I changed the printer cartridge and now there is a blinking light exclamation symbol and it won't print. I have had brand new print cartridges installed that were bad or were not factory type so they ...

...type. Hello sir; Is the stripes allway in same place and you use document feeder to copy, then you have to clean up a piece stripe glass on the plateform, otherwise ,you have to change drum cleaning ...

...change to dark Are you printing in "draft" mode? That is always light. Try "normal" or "quality". Also make sure you have selected the correct paper type. "Plain paper" is what most paper is. Photo ...