Asrock P4VM800 Socket478/SAT/A&V&L/Modem Motherboard (MOTASR02) "fault finding pc" Questions

...PC, I first have to keep power on button pressed for cca 10 seconds,than let it release, and press again. there might be a fault with the switch or cables linking the switch to the mobo. check the ...

...pc comp. chipset: ATI rs410+ULI M1573 ,M.board ERC410M.... Working good befor ... trying to do formating but on installing wind.XP it did not find any hard disc ..... I cann't find the driver to ...

...pc is dead, the fans work but that's about it. If you have the wiring diagram for an AOpen S760GXm-US it would be very appreciated. If you have any clue of what's wrong please tell me!!! Thank you ...

...pc`s model number. If the driver is not listed you windows is not supported. Try to run windows update it sometimes find the driver for you. Look in the device manager for driver fault. You can also ...

...pc using this motherboard and it worked perfectly for a month, however one day I pressed the power button and literally nothing happened. I tested the power supply and the front panel switch and ...

...PC and press power button, keep it pressed for good 30 sec then put it back in and try to start as normal. If that don't work you may find that chip responsible for display (GPU- Graphics Processing ...

fault finding on a mainboard. Many thing can go wrong. And it will sometimes cost more than a new mainboard or pc to solve the problem. Ask a qualified repair shop (hp support) about known issues with

...it on? Check that there is video going to the monitor by trying another monitor or trying your monitor on another pc or laptop. That way you can find out if the fault is in the monitor/monitor

PC makes (1) single beep every few seconds If you have its motherboard manual, try to check its beep code. This will give you some clue on what is the fault. Usually this could be dirty contact of RAM

...pc is Pentium D 2.8GHz (915) Socket 775 with 1GB DDR2 RAM. I bought Asrock G41MVS3 as it says it support Socket 775 and supports DDR3 1333(OC)/1066/800 non-ECC, un-buffered memory. After installing ...