...& analog buttons while turning power on. The whole display should flash on & off at 1 sec intervals, then release the two buttons. This resets the microprocessors & supposedly fixes display
Question about Denon Audio Players & Recorders
...power output or display.green standby light flashes. My avr 1610 was working fine but suddenly the display as well as out put from the unit went off.when power on the green standby light flashes 8 ...
...display did not lit and power indicator is flashing rapidly------you will have short circuit in speakers cables -----turn it off and remove short circuit cable-------or you have block in ventilation ...
Question about Audio Players & Recorders
...display reads, "No Disc" and then it powers itself off. I can't do anything with any of the buttons on the unit or remote when I power it up and it powers back off in about 10 seconds. Please update ...
...Press [DISP] (CLOCK). Notes: ¡ "AdJ" is displayed before adjusting the clock. ¡ Hold down []] or [[] to change numbers rapidly. power off displayPower Off Press [DISP] (Display) to change the
Question about Marantz Audio Players & Recorders
...power button on the display panel, or the power activator on the remote. All that happens is that the standby light continuously blinks. I goes off for a half second when the remote power on/off ...
...display :Power Off.but its not completely off ,the words: Power Off still display on the screen Remove off the battery for sometime and keep off for sometime. Later reset the batery and test, if the ...
Question about Sony Audio Players & Recorders
...Hold the buttons 6, 7, 8. And turn on the power. The display should activate all options, then turn on and off a few times and finally display End. Then the memory should be reset back to
Question about Marantz Audio Players & Recorders
power. The display shows briefly then goes out. Then when pushing the power button it just clicks with no display. Unplugging it and plug it back in will cause it to show the display briefly again. It
Question about Onkyo Audio Players & Recorders
power and plug again,them swich on .The display flash one time and go to off.The power to the tube is 3.8 acv at pin 1-2 and 58-59 Hello, Your Onkyo has the 3.8 VAC which normaly is correct for normal
27 questions posted
Usually answered in minutes!
135 Questions
96 Questions
101 Questions
78 Questions
82 Questions
