Denon AVR-95 Receiver "protective circuit" Questions

amp comes on and goes right into protection mode Turn the reciever on for a second or two and then off before the protect mode shows up on the monitor. Repeat this step about five times and check to ...

all lights operate on front panel but no output to the speakers Hello, your unit is in "protect" mode. The protection circuit is activated to protect your speakers from a shorted output IC or output ...

sir my amp comes on and shut off One of the amplifiers many protection circuits has been tripped. Which one it is may be tought to discern. Is there any message on the display? Could be a power supply

stuck in protect mode My sony str-d1090 audio receiver is stuck in protect mode! how do i resolve the problem? Protet mode is a special diagnostic mode that starts when a fault is detected. When in ...

Sony STR-DE 605 FLASHES PROTECTION ON READOUT I get no sound or anything regardless of input. To all users with this problem: Protet mode is a special diagnostic mode that starts when a fault is ...

we have a Marantz sr4500, everytime we put it on it makes a Zzzzzz sound and then it turns off with a loud "buk" sound and shows protect on the amp's screen, after few seconds the amp ...

flashes protector my sony receiver flashes protector Protet mode is a special diagnostic mode that starts when a fault is detected. When in protection mode the unit is prevented from starting by ...

I have blown the protection circuit on my yamaha rx 600d amp anyone with a clue whats needed to fix? Hi friend,when something goes wrong in the output of the amplifier the protection circuit take ...

comes up when switched on protection Protect occurs when 1 or more of your speaker wires is touching somewhere. Power off the receiver, connect speaker wires to receiver and speakers again, power back