Yamaha HTR-5990 Receiver "wont power reciever" Questions

...power source problem since it wont turn back on, check wiring, plugs and look around, and smell for burnt, or hot components. Does the reciever have separate speaker switches? Try turning off the ...

Reciever wont go on I get "Protect" Display on my reciever Your are running out of power !! you may have a blown fuse(s). I had the same thing and I replaced two blown fuses and OK now.

...wont stay powered on For a Kenwood VR-5900 reciever. I push the power button, you can hear the power-on power-off clicking and sometimes the display will flash for a second but then it goes back to ...

...wont' work the power indicater flashes green but the display won't light up. How can i get the display to work agian. I read something the other day in the user manual about re-setting the ...

...wont power on but the standby light will come on and when i press power, the stand by light just turns off It sounds like the output transistors may be putting this into protection mode causing the ...

...power supply circuit the DC detector identifies the problem and wont start unless you repair it. the internal supply +15v -15v these 2 regulators and the capacitors around it makes this problem. if ...

...wont turn on. Standby light is on. Tried resetting it from the back but didnt work. Please advise A standby condition can mean a fault in the receiver. voltages in the system are off. This can either ...

...Reciever, CD player and DVD Player. What is the beat way to connect these for best porformance? lets see, 3100 has no digital out, so you need analog inputs for the audio. Best picture with the 3100, ...

power reset goes into auto-protect at the drop of hat. rechecked all speakers and disconnected sub. will reset sometimes other times no. but will always click when standby/on button pushed. that is ...

power wont come on at all i have a DENON AVR-1506 7.1 i had used my reciever last night and it worked just fine, i didnt have the volume cranked , and i wasnt messing with the settings. now today i go