Hoshizaki Cubelet Ice MakerDispenser Water Cooled LED Sensor Operation "machine level sensor" Questions

ZDI15 make too much ice The ice bin overflows with ice. The high level sensor is in place but does not stop the machine making ice. high level sensor is bad.

...level be and how would you adjust the water level sensor. My machine runs out of water. It makes paper thin ice an wont get thick enough to tell sensor to dump Check solenoid for proper

level control sensor is not reading the water level drop to go in harvest.you can do a self check test or replace the sensor(little blk box) could be wire harness. check to makeure your water value is

suggest cleaning your water level sensor, and the plastic cup in which it sits. Once you have done this, turn your machine back on and watch its sequence of operation. Please let me know if this helps

...level not in control machine keep on filling over flow. 1. bin full when bin is empty means that the bin control sensor is dirty or need to be replaced. But since your having problems with water over ...

Will not make ice. Low water level light stays on when it is full of water. Maybe water level sensor not functioning properly. Or maybe need cleaning. What is the model and brand of the machine?

...machine even after changing water level sensor Is the sump tray full of water? or is it not filling up fast enough? Water level sensor lets control board it needs water or its full of water. If ...

...machine, it will go into freeze cycle. It will complete the freeze cycle and go into harvest cycle. After about 10 to 15 secounds into harvest cycle, the board just shuts down, like the power is shut ...

...machine is on a ship and someone suggested it could be the water because we often change water. we also have some smaller ones AC86 and EC86 and they are working without any problems. thanks for your ...

...level sensors start to get dirty or scale build up..but not enough to cause bin full light to come on...clean senors.ice machine..acid wash..rince....if it continues relpace sensors...make sure when ...