Astar LTV-2701 27 in. HD-Ready LCD Television "megmeet power" Questions

MEGMEET power supply. part no. MLT386X Hi, Do you have this power supply ? Regards Scott I HAVE PROBLEM TO GET THIS POER SUPPLY TO BUY WHERE I CAN GET IT PLEASE

...supply. power supply is made by megmeet and it is MLT169A THANKS jaime867 for fixing my tv power supply. Check this guys out: http://www.shopjimmy.com/ I could fix it for you but I live in

...of part any where. Can you help us? part number is MEGMEET MLT386X power supply Thanks, [email protected] I bougt this PS on eBay for $85-13S/H. Something wrong with my TV but supply is OK ...

Megmeet MLT386 power supply, check these parts: 1) Swollen caps on the PS secondary circuit (may cause the red light blink or shutdown problems). 2) Blown fuse F1 (5A/250V) this is caused by a shorted

...to fix prob. other times screen just keeps flashing I have the same problem and from researching the issue it seems to be the power board in the tv. Megmeet (MP116) RVE 1.6 is the power board

Megmeet MLT386 power supply, check these parts: 1) Swollen caps on the secondary circuit. 2) Blown fuse F1 (5A/250V) this is caused by a shorted FET at QA1 (20N60), you may also find that SMT cap CX23

...Megmeet MLT386 power supply, check these parts: 1) Swollen caps on the secondary circuit (may cause the red light blink problem). 2) Blown fuse F1 (5A/250V) this is caused by a shorted FET at QA1 ...

megmeet.com and order the MLT169c :( it cost more than caps but a lot less than a new tv The original request was with regards to the LCT2701TD TV, which I believe uses the MLT166A power supply. While

...power supply Model MEGMEET - ML686 . that power supply used for LCD TV .it's bad Brand and nobody care in service center. hope somebody help NO OUTPUT FROM POWER SUPPLY, FROM BRIDGE BD1 ALREADY ...

...Megmeet MLT386 power supply, check these parts: 1) Swollen caps on the secondary circuit (may cause the red light blink problem, but also see below). 2) Blown fuse F1 (5A/250V) this is caused by a ...