Denon AVR-485 Receiver "resetting microprocessor work" Questions

...step 3 does not work, start over from step 1. If the microprocessor has been reset, all the settings are reset to the default values (the values set upon shipment from

...work, start over from step 1. • If the microprocessor has been reset, all the button settings are reset to the default values (the values set upon shipment from the factory). • Calling out preset ...

my denon reciever display wont't work my denon avr-2805 reciever wont' work the power indicater flashes green but the display won't light up. How can i get the display to work agian. I read something ...

...work. This sounds like it has a microprocessor problem. Try unplugging it from the wall and leave it overnight. That will give the microprocessor a chance to reset and then try it again. If it ...

resetting the microprocessor does not help. You can find out how to reset the microprocessor from your manual. If you have the Denon avr 887 with the system turned off hold the power on button and the

...work, the meaning of "Protect", is shown when you have DC Offset(meaning a damaged amplifier) The receiver is switched on and off, by a microprocessor IC(a computer within your unit) If the amplifier ...

player has gone to recovery mode. homdo iget back to normal Unplug unit for 12 hours to reset the microprocessor then try again. If it still does not work properly, have serviced

...video game, matrix doesn`t work...i reset the microprocessor but still nothing, i can only use direct mode & stereo...can somebody help me? maybe you need to replace a fuse? is it hooked up ...

no sound i'm getting no sound from my receiver. nothing is working....the radio, cd player, dvd etc. is there a way to reset it or anything. i've had it for a long time. never had a problem. if i turn

i reset the microprocessor that my denon avr-886 , but is not working One or the output channels is probably bad you can check for a short on the output transistors using an ohm meter. Make sure that ...