Denon AVR-485 Receiver "display lit" Questions

...all it does. The LCD display is fully lit. No words, just every pixel lit up. None of the ports work either. No sound or visuals. Just on, with a fully lit display. What make and model

...display lit up comletely, tuner still works but I would like to have my display working. Any sugestions? Sounds like display driver board {IC} has damaged. Contact any service technician. Electro ...

display is lit up. For the entire display to be lit up you most likely have a shorted display driver IC. That type of IC is usually a surface mounted flat pack type that even an experienced technician

on the display is lit up so the display in completely unusable. Would this be a fuse of some kind? Or, a bad display board which needs replacement? Sounds like a faulty board indeed - sorry 'old boy'

...display lit up and stay on. It doesn't work at all !! Any suggestions? Have you tried doing a factory reset? 1. With unit powered ON, press the VIDEO and TONE DEFEAT buttons. 2. Display will show "AH ...

...display is back lit by two 12v fuse (AGC) type lamps. It is possible to replace them your self but there are tricky connector interfaces and plastic plug type fasteners, and the tin cover has to be ...

...display did not lit and power indicator is flashing rapidly------you will have short circuit in speakers cables -----turn it off and remove short circuit cable-------or you have block in ventilation ...

...display screen will only stay lit for a few sec. Also my VAUX (where I watch my cable from is not an "option" from my selector knob TURN OFF MAIN POWER HOLD DOWN SPEAKER A AND B BUTTONS WHILE TURNING ...

...display is lit power light bars no moving I know this is a old post but check all your connections. There is a common issue with a lot of these recievers that have no output and typically it is the ...