Abit KN8 Ultra Motherboard "power supply problems" Questions

...power supply is a best tech and allows voltage surges to the motherboard which fries it too. If available you usually have to replace both the power supply and motherboard. I do not know what exactly ...

...power supply.Old power supply doesn't work.When I press the power button.Sometimes pc open.Sometimes doesn't work.My mainboard Foxconn g33m02.My pc dell inspiron 530. My power supply Gigabayte ...

...problem? change your power supply replace a new one, you can find the exact specifications of the power supply on the back or on the sticker of the body of the power supply.. hope this may help ...

power supply, and the system fans do not turn on and stay on when you power on your PC, then either the power supply has failed, a component connected to your motherboard has failed or the motherboard

...power supply. If this connection is removed, the power supply behaves normally, but nothing works because the CPU needs the 12V power. I have had this problem since first powering up the system, so ...

...power supply! Check with power supply from another computer. You have intermittent power supply to the fan, you have no power supply to the motherboard, processor fan is not spinning , not is ...

...power supply mother small LED only working not processor fan and power supply fan not running plz give a solution To narrow the problem remove the power supply to the unit then get a small wire to ...

...power supply is working??Are you hearing the fun??The led on the back turn on??If no then your power supply is dead First to check the board with different Standard power supply and if the same ...

power supply, not your main board. If you have a power supply tester, test the power supply. If not you can use a continuity tester to measure each wire individually. If the power supply tests good it

...power supply but its still not powering up. But when i remove the 4 pin 12V cable from power supply the cpu fan is rolling, it means that the power supply is working but when i tried to connect the 4 ...