Hoover Nextra 160 HNWF 3137 Front Load Washer / Dryer "sodden" Questions

never completes its program cycle. stops on final rinse before spin. clothes are sodden and drum has lots of water in it you have a blockage in the pump filter or the hoses, or a faulty pump. put ...

Mr christmas carousel lights above each horse won't turn on All of a sodden the lights above each horse won't turn on. The music works and it still spins. i would check any bulbs it might have some ...

...drain My Beco WMA 765 W washing machine spins & some of the water drains away but I'm left with sodden clothes. I've tried spinning on its own & drain on its own, both times the machine seems to ...

...Doesn't seem to be rinsing or spinning, tried the time saver and the items were still soapy and sodden. Switched it off and on to a new cycle and it is still not spinning or rinsing. Don't have ...

...i cant do anything with the machine except drain it from emergency hose underneath and remove my sodden clothes. I have tried a spin (empty) and works fine and i have tried the drain cycle (empty) ...

...end of the wash the door wouldn't release for ages.When I did get it open the washing inside was sodden and quite a lot of water was left inside.I drained the hose and tried another wash...same ...

...wet jeans which is throwing the whole thing out of kilter. It only takes about a half pound of sodden clothing to do this. I have a Kenmore 22990 top loading washer. it shakes violently and

where it will drain and spin, but it will not go through the rinse cycle and it leaves the clothes sodden with water. Running a Rinse and Spin will have the washer rinse with the detergent, though it

my hoover hnf3157 machine spins briefly after a wash leaving the clothes still sodden. When it goes to a high speed spin it lasts about 5 to 20 seconds then stops. I have to do a separate spin to ...

Dryer not working. Seems to be letting in too much water. Clothes are sodden. If there are no error codes then it is possible that the program controller unit does not output or the cycle is not ...