Maxent MX-50X3 50 in. HD-Ready Plasma Television "hooking cable tv vcr dvd" Questions

...Cable cords are going out to TV from this unit and in from cable box. I get no sound at all and picture only from DVD part. I need both to work. Thanks for any help. When you use component audio, it ...

...cable for the dish to the back of the VCR buth that signnal is not compatable. What is the best way I can hook up??? jimj Unhook the dvd cables from the AV1 ports on the tv. Then hook these DVD ...

...TV....cable wire from outside/wall to cable box in, cable wire from cable box out to VCR/DVD in (make sure this is on Ch 3)....cable wire from VCR/DVD out to TV (make sure this is on Ch 3)....... ...

cable from ur vcr output to ur tv antenna ,,,,,after u have done this read instruction .....to connect ur dvd ....just plug ur cables from ur dvd to the back or ur tv....marked as dvd input.... cheers

...TV via Composite (YELLOW) cable, into the Yellow AV input on your TV. You can then tune the VCR section to match your TV's RF input (if you prefer this connection). Good luck... "if this has helped ...

TV. This should be a coaxal cable. Now when you want VRC/DVD use your remote and select input. Some older TV's have the aux input just before Ch 2. Some remotes have an input button. once you have

cable connections Your flat screen TV should have separate Audio and Video connections. These are the connections that you should use to connect your VCR and DVD player. If you have a combo unit, that

...tv should have the same thing,it should say input,get a rca cable with plugs on both ends and match the plugs to the colors,if you tv or dvd player,doesnt have these,then you will need to plug your ...

...the tv to the dvd/vcr. Then I ran the audio cable (red & white) from the tv to the dvd/vcr. A little tricky figuring out where on the tv to actually connect but eventually got it. YUV2 on the

tv cable jack. Tv should be on channel 3 or 4 to use it this way. 2. There are Yellow, Red, White Jacks on the vcr/dvd player. There should be a couple sets actually. One set should say OUTPUT on them