Hoover HTC243 Top Load Washer "wash machine always unbalanced" Questions

Ad

Question about Kenmore Washing Machines

1 Answer

...the bolts underneath and they are all tight. What is the problem with this machine? I wish I could lift it because I would definitely throw it to the curb! Plastic part under wash tub . gear spline ...

Ad

Question about Hoover Washing Machines

1 Answer

...loudly follow this step and fix it. God bless you Washing machines are complex and have many functional components. It's always best to stop an unbalanced load, rearrange it, and re-start the

Ad

Question about Haier Washing Machines

1 Answer

always unbalanced in the spin cycles the machine may need to be releveled, if it is not level the clothes will have a tendancy to go to the low side and thereby causing the unbalanced condition

machine must be level front to back and left to right. Also all 4 feet must be in equal contact with the floor. Make sure you load the washer evenly with clothes. Mix large and small items so when the

Question about Whirlpool Washing Machines

1 Answer

always loud or just when it is a full load.  If the load is unbalanced it will be loud.  Most F/L washers today have some kind of unbalanced load detection, but they are not all that great.

Question about Haier Washing Machines

1 Answer

...machine. The washing bit works fine. It's when it comes to the final spin it nearly always says its unbalanced even if you set it going empty. Can you help please. S.Baker belt might of ...

always goes unbalanced, fixes? frame brace / bushing damaged -not properly balanced Take the top off. Check the shock absorbers and springs. It sounds like one of yours is broken or come unhooked.Also

Question about Samsung Washing Machines

1 Answer

...machine B1215J E6 error what is this E6 error I have the same E6 error code and violent movement when in spin. have tried to level and such with the same results. Always acts like it's majorly ...

Question about Kenmore Washing Machines

1 Answer

...washing machine always has an unbalanced indicator, even if i run it empty. Check the balance load sensor. Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE

Question about Fisher and Paykel Washing Machines

1 Answer

machine is ALWAYS off balance. I have tried adjusting the nobs on the bottom several times...a level always reads the machine is level. Hello, the possible cause is if there is a thumping noise during

Not finding what you are looking for?
Hoover HTC243 Top Load Washer Logo

152 questions posted

Ask a Question

Usually answered in minutes!

Top Hoover Washing Machines Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

NOEL
NOEL

Level 3 Expert

8606 Answers

Are you a Hoover Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...