...ccd fault is always white, bright, and sharp. But in this case, it is a problem with the filter in front of the ccd, It requires a cleaning of the filter it can be best and easily done with an
sharp edge, this could be a defective sensor). Follow the instructions in the manual for cleaning the sensor. Avoid touching the sensor (unless it is with a specialist sensor cleaning brush) and avoid
...sharp spots"? I will assume that you are talking about speckles of white or colors in the deep shadow areas of your pictures or in black areas of night time exposures. What you are seeing is ...
sharp) and the camera is mounted on a tripod. Once set I put a little dot of paper white out on the diopter adjustment knob so if it gets turned I know and can quickly return it to the correct spot. I
...sharp tools and check the flash condensor for bad contacts, but also if it still has its capacity. Every where you see white spots are possible bad contacts. It is almost impossible to solder in a ...
...Best (5:1), Better (8:1), Good (10:1) in 4:2:0 format Movie: 640x480, 320x240 in 4:2:0 format Image Sharpness Control: High, Normal, Low Sound Effect: Beep ,Shutter, and Power-on sound Auto LCD Off: ...
white ballance (WB) it's very important in the overall quality of the colours and although Auto is not bad .. indoors the manual setting is better IMO You are right about the P and M modes but usually
548 questions posted
Usually answered in minutes!
671 Questions
616 Questions
483 Questions
426 Questions
404 Questions