Hoover HDC6 Electric Dryer "tumble relay" Questions

tumble at all. Then I thought maybe the belt was over heating, causing it to slip. But I am unable to use the dryer, it is COLD and it still only tumbles briefly in a counter-clockwise direction. HELP

...tumble which is fine ... heats up as normal and by-passed thermostat and they are fine ... any ideas? x if it tumbles in reverse but not forward then it may be your reversing relay is only working on ...

...tumble until I let go of the button. As soon as I let go it stops. there is a relay that latches on when you push the start button .. that relay is released by the "door open" switch .. i would ...

and bought a relay, as suggested. It cost me under £20 and took me minutes to fix. Saved me hundreds on a new tumble dryer. And whats amazing, is that I'm a housewife with no tech knowledge. So Thanks

I have a fault code e15 on a hoover tumble dryer dmc d 1013bc-80 what is at fault Heater relay faulty. Check relay, check heater, check wiring.

...tumble dryer for about 18 months and now when I try to press the start button the motor starts, but then stops as soon as I release the button. The button pops out straight away but if you keep your ...

Sounds like solenoid is faulty DLE5955 dryer makes clicking noise when tumbling, only tumbles for 4-5 spins at a time then stops for about 2 minutes. Clicking solenoid draws lots of power as lighting ...

tumble, but it will not continue to operate when you release the start button Is your dryer an evenheat dryer? It will say evenheat above the timer. Can you give me a model #? The problem is either an

dryer not heating cleaned out vent and replace heating element. coils are not turning red. the dryer tumbles but just doesn't heat. Any suggestions? Check the moister sensor and relay

I have an Amana Electric dryer model ALE331RAW. It heats up and tumbles but it will only run for 10 minutes and then it shuts off. Like it is getting too hot. What could the problem be? plugged up ...