room for the shredder blades to pull in the paper. If the paper catcher is too full the blades can grab shreds from the bottom and stop the blades movement. Just be careful. Shredders can be dangerous
help. In the Auto position it should stop by itself after the paper has passed thro...if it is not stopping try cleaning the "glass eyes" in the middle of the paper opening.( unplug the machine first.
Question about Omnitech Office Equipment & Supplies
...stop, when I insert paper to shred , it stops... I push reverse, it works , pull paper out and runs non stop....... I oiled a piece of paper and was able to shred it, but still no change! I have it ...
Question about Royal Office Equipment & Supplies
How do I fix the rollers that won't turn when paper is inserted in shredder? I have a Royal SC 800.The shredder works in the automatic position until I insert the paper, then it stops. It works in ...
Question about Omnitech Office Equipment & Supplies
...paper and it runs non stop! Sounds like there's blockage between rollers and it also jams the sensor so auto function stops working. You will need to clear out as much jammed paper as you can using ...
...response , put a piece of paper in then it started up but would not stop after the paper was shredded. Try cleaning the "eyes" in the middle of the paper slot...they just may be dusty with paper
Question about Office Equipment & Supplies
...Paper Shredder PS-045/B stops working after a while. The shredder will work fine for a while, then slow, then stop. After a while (a long while) of being off, it will work again. I think it may be an ...
Question about Aurora Electronics Office Equipment & Supplies
...This time auto ran just for a second then stopped. I did it a third time but I had a sheet of paper ready in the feeder. Ran on reverse. Slid it to auto and it took the paper and shred it. I
Question about Office Equipment & Supplies
...stop when no paper is being processed. It is touch sensitive and stops if you touch the sensor bar, as it should. Forward and reverse operate as they should. I have tried to remove all accumulated ...
...a light weight machine oil poured on the paper to keep the cutting teeth working freely. Good luck. P.S. If this doesn't work then just take the head off and cleanj/lubricate any bearings you
69 questions posted
Usually answered in minutes!
70 Questions
51 Questions
52 Questions
53 Questions
35 Questions
