VAX Appliances Vax X5 Bagless Upright Cyclonic Vacuum "problems working" Questions

...working, it could be due to several things. Follow the trouble shooting steps below. 1. Check all connections from hose handle to PN for discoloration. Any parts showing discoloration or melted ...

i can't get the charging light to turn on. My Kone was working fine yesterday, but not with as much power as it used to...so, I turned it on and let the battery totally drain. When I put it back in ...

...working and motor stops after some time you have problems with motor not the switch If you turn vacuum on and if’s working but after putting him on the carpet brush roller slow down or stop turning ...

my beater bar will not spin when the handle is lowered? But there's suction thru the hose when the handles upright The motor that spins the beater bar is connected to a tiny switch, if that switch is ...

The problem has been getting worse. It works, then cuts off. Then works and cuts off. Making sure the canister is not full. Time b/w it working is getting longer and longer. Almost seems this time ...

Hoover TeamVac leaking Last year the machine worked without leaking, this is a new problem. The machine is a few years old and I don't use it very often. The tank does not leak when I fill it and ...

...working you have problems in wands or true hose If power head is not working directly connected to power you have problem with reset switch or power head motor Try to push reset switch several times ...

Hello, I have an electrolux tweanclean EL7055A vacuum canister, and can't switch it on anymore. The cleaning system is working well (so the power is ok) but the command which is not directly in the ...

...and is going bad.... have the repair man replace the ignitor, or DIY.... Check out this tip about your problem... Oven not Working or Oven not Heating Oven Problems Replacing the Igniter ...

The problem is that the cleaner is heavy to use and does not pull itself forward as it should. It has been back to the supplier 3 times but they have not fixed the problem. The LED's on the front ...