...Burning rubber smell means the brush belt need attention. Make sure the brush is turning freely and replace the belt Eureka 4481 very loud. Already replaced belt. Any suggestions as to what problem ...
...but smell like a burning belt If it smells like burning rubber, the belt is probably worn and slipping. If it's another burning smell, your motor windings are probably shorting and will burn out ...
...Burning smell I have an Eureka Capture Vacuum and it starts to give off a burning smell after a minute of use. I cleaned the brush, and the belt seems fine, but the smell still persists. Any advice? ...
...the brush roll is free not sticky..Next is the belt okay, not jamming on the brush roll making the burning smell...You could take off the roll and run motor on its own ..finding out if its the
Question about Bissell Vacuums
...burning smell coming from the vacuum? I was using it to vacuum in the garage this morning (about 2 hrs) & this afternoon (about 2 hrs)--the burning smell started about 30 min. ago. I was using it to ...
burning smell. if its a rubber burning smell check the belt and the brushroll. if its an electrical burning smell then dont use it. the motor is overheating and will eventually get hot enough to catch
Burning Smell Hi, I have a Rainbow E series that when I run the vacuum there is a burning smell. I have cleaned the entire unit and filter but still have the smell? I am afraid that the motor will ...
...burning smell There are two reason you could be smelling a burning smell- 1. The belt is too stretched out and needs to be replaced. This causes it to slip when the vacuum is on and will create that ...
...burning smell My 9yr old sebo has died. Was working fine, but then went off quite suddenly. A strong burning smell (like hot oil / metal). Replaced the fuse in the plug (this fused at the same time) ...
130 questions posted
Usually answered in minutes!
29 Questions
16 Questions
5 Questions
3 Questions
7 Questions