TASCAM PHANTOM POWER VOLTAGE I recently bought a mic that requires 48v Phantom power. I am afraid to buy the Tascam us144 because it is vague on the Phantom voltage. In fact, it doesn't give a voltage
phantom power ive got one of these for a c03 samson condensor mic and the phantom power doesnt work, the switch is on.. any suggestions? thank you are you using the xlr connection socket. There should
Question about Behringer Computers & Internet
...have: a) 2 AKG 1000S microphones (they seem to be working, the LED react to sound, barely, [power & phantom power light {+48 V} are lit]) b) plugged into inputs numbered 1 & 2 of a Behringer Xenyx ...
...I get very little signal on both Mic 1 and 2. Mics used: Rode NT1-A and Shure SM58. I know about phantom power. I even re-read the manual (such as it is). No more ideas. Would appreciate any help. ...
...Lamda Lexicon usb interface. When I plug in the condenser mic to the interface, and activate the phantom power, the mic does not work at all. It has to be something simple. I just can't figure it ...
tascam us144 to record my raps on ableton live but when i plugin my condenser mic in one of the two phantom powered mic ins then i only have sound there, so when i put my mic in the left mic in then i
just stopped working. no power. the phantom power light will still come on. but other then that, no power Time to replace it.
open helpline phantom power will not stay on - cannot use mic Well i know that the pci-e is build with only the 1 slot as power supply , instead of using the 12volt connector, which leaves it with ...
another piece of equipment. If they are OK and only the Layla causes the problems, the internal 48v phantom power supply is faulty
...From Channel 2 on my UA 25 I can't get sound from my R channel on my Edirol UA 25. I tried both Phantom and regular microphones. Left channel records fine using Sound Forge. No output from R.
25 questions posted
Usually answered in minutes!
38 Questions
26 Questions
26 Questions
22 Questions
24 Questions