Achiever SCS-6 Strip-Cut Shredder "silicone used shredders" Questions

broken off DB-0812D mini-transformer from PS 67Cs Fellowes shredder Purchase a 220/240 volt to 15.6/15.6 volt transformer and run flying wires as it will probably be larger in physical size.I used a ...

I have an E350 with 3 point took up. Can't get the deck to drop. It has a shredder hooked up and it will raise it up and lower it a little but not far enough down to shred. try spray silicon lubricant

...used Silicone lubricant for many years and it does not and has not caused any problems in my PS60. Spray it across the top of the cutters and manually run the shredder (without paper) forward and ...

...can I get it to stop or fix it? the cutter wheels in side the machine needs to be lubricated. use a silicone lube. like tri-flo. Spray the lube where you put the ...

I need a new paper sensor for my royal 80x Confetti cut shredder. Can anyone help me find someplace to get parts? Contact Royal at 1-800-524-0799 for parts assistance. Most paper shredders use a ...

...shredders have the screws mounted under the sticker on the top of the unit. Therefore, if you do not locate the screws in the internal part of the head unit, they are certainly positioned under the ...

shredder sounds like dry rubbing when in use. Should I use WD-40? No do not use WD-40. They make shredder lube. It is a thick silicon type oil. I would just google shredder lube and I'am sure you will

can I oil the shredder? Hi, No, do not use oil... but, you can lube it with a dry graphite spray or a silicone spray... even a silicone waterproofing spray will work to lube it. heatman101

...used WD-40 just once, because I am in a hurry to fix it. The other type of oil I have at hand is silicone based! WD-40 probably hasn't killed it, most of it will evaporate in time. It can cause the ...