This is usualy due to a power supply failure, or one of the boards has a
short on it. Jerry G.
more...
FEW IT GOES
IN STAND BY I DID OPEN IT , I SEE A BOARD AFTER POWER SUPPLY
THAT I CHECKED IT SEEM IN
SHORT ALL THE COMPONENTS THERE IS
A BIG BLACK "THING " MARKED LG WITH A BIG METAL "REFRESHER"
MAY HELP ME SOMEONE -DELFO
more...
look at the fuse again if it is blown then it is a draw issue on the power board a dead
short that over draws amps. a service center is needed to repair this issue
more...
is pushed the tv seems to surge... The screen makes a flicker and there is a buzzing followed by a click and then a
short silence. This repeats until we unplug or turn off the power. The screen will not display the picture or sound due to the instant
more...
Dell W5001c I have a dell 50" and the connection between the buffer scan bottom and the y sustain
short outs. I want to know where to get these two parts. PCB LJ41-03078a (Y Sustain) and LJ41-03080a (scan buffer bottom)? I
more...
are 4 rectifiers (diodes) very close to the fuse. They are black with a stripe on one end. Most likely one of them has shorted. This is a common problem and if you know how to check them this will probably correct the issue.
more...
The power supply is in the protect mode. There are many things in the set that can cuase this. Most likely there is a
short on one of the circuit boards, or the power supply itself has failed. You will have to have the set serviced in order to
more...
Sponsored Links