Vizio L32 32 in. LCD HDTV "stuck channel 1" Questions

...stuck on one (1) channel Receiving good signal. But the TV is stuck on one (1) channel. Can not change to other channels or the volume from either the controller or buttons on the TV. Is there a ...

STUCK ON CHANNEL 1 AND WONT SWITCH TO OTHER CHANNELS USING THE CHANNEL ARROWS ON THE REMOTE CONTROL Your TV is in Showroom Mode - to change: Menu>Picture>Mode>Power up>Home Then go back and autosearch

...stuck on channel, won't advance past channel 7.1 TV is about a month old, problem started two days ago. When flipping through channels as soon as I get to channel 7.1 the TV gets "stuck", it won't ...

...BATTERIES OUT OF THE REMOTE DOES THIS STILL OCCUR? I WOULD HAVE THE UNIT CHECKED BY A SERVICER. THE CHANNEL UP OR DOWN BUTTONS ON THE UNIT COULD BE STUCK. IF NOT YOU PROBABLY NEED THE MAIN BOARD

With the channels changing on thier own look for a stuck button on the TV set such as the channel up or down. You might try unplugging the TV for 2 minutes and then trying to see if resetting fixes it

...channel up or down button is not stuck on the tv and or any remote that is set up for it. 3. Find the tv's infrared sensor and cover it with your hand or tape. If the channel changing stops then ...

...channel on the Setup screen and it keeps stuck on this screen. I dont have the remote control. How do I do to access the HDMI channels or do a hard reset on the tv if necessary? allow the tv to go ...

remote but still its changing them on its own Is it going one way - channel 1-2-3-4-5 bottom to up or any way at random. Find out which way and check the channel button on the TV to see if it is stuck

...channel that it is currently stuck on 6. Push Menu to exit 7. Change to any other channel 8. Reconnect coax to tv. Followup: Avoid this channel and go give Cablevision a call and let them know about ...

...stuck on 1 channel Try auto tuning. May the channel memory have been erased. If so it will no show other channels. If you wish to get some details; check the site linked here. Pull up older posts. ...