Question about Vacuums
...shaft by hand but eventually will spin free but not for long when running????? I took the brush out of the motorized attachment, took the 2 screws out, and carefully popped the attachment open. There ...
Question about Sebo Vacuums
...gear rather then the belt that's attached to the motor that's gone bad. I have never replaced the motor belt in 8 years of servicing Sebo vacuums. The easiest way to replace this belt is to ...
...gear rather then the belt that's attached to the motor that's gone bad. I have never replaced the motor belt in 8 years of servicing Sebo vacuums.The easiest way to replace this belt is to loosen the ...
...belt, the beater brush, and the metal gear. The gear didn't fit correctly - so the motor just spins without moving the brush. I ended up going to the store and buying superglue that withstands high ...
attach very solidly, but I put every thing back together and it works great so far. It is a definite design flaw. I found that you have to keep the main unit on the floor when the brush is running. Do
...gear off the shaft. Turn the clutch over and remove the three screws, starting with the one that retains the tiny circuit board and slide it out of the way. The end of the body will come off with the ...
gear drive shaft, as the lever inside fell off and the shaft came out. (Common problem by the sound of it.) How do i remove the actual gearbox itself. I have removed the 3 screws on the bottom, but it
gear that control the brush is not working either. is this a common issue? im not a pro. but i am a tech. and have a few of these. here is what i have found.. if the brush and the uv-light both do not
48 questions posted
Usually answered in minutes!
746 Questions
388 Questions
262 Questions
179 Questions