...nozzle, cleaned fuel filter, pressure gauge reads OK. Hi, Here are a couple of tips that I wrote that tell you how to troubleshoot a Torpedo or Reddy heater... Reddy Heater - Troubleshooting Torpedo ...
...torpedo heater all lines are clear. Both air and fuel. The fuel filter is cleaned. I have removed the nozzle per intsructions and it is free of dirt and clean. Plenty of spark. Hi, Here are a couple ...
Question about Master Heaters Heating & Cooling
...TORPEDO SPACE HEATER-NOW THE PROBLEM- UNIT WILL ONLY RUN FOR APPROX 16 MIN THEN SHUT DOWN AND THEN I CAN RESTART AND RUN ANOTHER 16 MIN-ALSO I HAVE TO LEAVE COVER LOOSE OR UNIT WILL NOT IGNITE-HAVE ...
...will not fire. Glow plug lights up. I changed the kerosene and cleaned the nozzle. Hi, Here is a tip about troubleshooting Torpedo Heaters Reddy Heater - Troubleshooting Torpedo Heaters ...
torpedo style kerosene 50,000 btu smokes older torpedo style kerosene 50,000 btu puts out a lot of smoke. Tried fresh kero, any ideas? clean out the fuel nozzle and if it wont burn cleanly, replace it
...torpedo style heater if you take the cover off it fires right up if you leave the cover on the fan just runs but no flame I cleaned all hoeses and filters plug now iam stumped Well usually when this ...
Question about Milwaukee Tool Heating & Cooling
protemp heater is not running right and blowing black smoke before it kicks on Sounds like you need a new nozzle and filter. Clean the pump strainer too.
Question about Heating & Cooling
torpedo heater fires and burns for a bit then shuts down checked pressure and around six, has fuel, any clues. Thanks When's the last time you changed the fuel filter. nozzle, and clean the pump ...
Question about Milwaukee Tool Heating & Cooling
...torpedo heater started. When you turn this unit on it has great spark and it appears that every thing is working however it appears as if it is not getting fuel. I have checked the fuel line and the ...
...torpedo heater. New plug, cleaned the injector, fan and the foam filters. It will start and ignite without the top cover on, but when I put on the top cover it will not fire. I have spark, and fuel ...
15 questions posted
Usually answered in minutes!