Bunn -O-Matic Corp. 2 Warmer Auto Brewer Black "hi limit" Questions

...switch bad? Most exspensive part of course. Depending how old the brewer is ; it sounds like your thermostat is bad.You should get straight continuity accross the hi-limit,element and

...a fuse or a reset or must I replace a heating element? Thanks, Bob W. Check the hi-limit switch between the elements and or the thermal limit between element to lamp, and also check the

...hi limit has opened due to the tempurature in the tank getting too high, usually caused by evaperation of the water, and the level drops too low, from not pouring a pot of water in at least every ...

water will not heat, switch was turned on, thermostat dial was checked, unit was plugged in. Check the hi-limit thermostat on the boiler, then the thermostat inline from the element to the ready light

Vpr coffee maker, the coffe was cold. Why did this happen? Possible the hi-limit turned off the heater, the thermostat is not working or the elements are damaged, or the inline thermal fuse is damaged

The coffee is not coming out hot into the pot. Check the hi-limit switch on the tank and the inline fuse from the element to the ready light.

my 8572 is not heat water,also brewing green lighth off? thank you Check hi-limit, inline fuse and or thermostat.

coffee coming out of machine is cold Sounds like the hi-limit thermostat or the inline fuse is damaged. Check the top of tank to find out which one is damaged.

water won't heat up in unit. Check the hi-limit thermostat or the inline fuse if your model has on installed.

will not get hot Bad heating element,hi-limit or main control board behind front panel is bad.