...error, clean torque board in the back and check for two pins on the shaft by the motor coupling. if there is one, replace the shaft assembly. make sure the motor is plugged in. if it's on and not ...
...error (might as well do both) and remove the 4 screws that hold the motor mount to the machine. pull the motor back and unplug it. you'll see an optic sensor board to the right of the shaft on the ...
...error message sensor short , the right part did not freeze much remove the back cowling on that side and clean the sensor boar with canned air (in front right of the motor). check the wires to the ...
Question about Bunn Kitchen Appliances - Others
...ERROR ULTR060091 the shaft off of the motor has 2 pins spaced apart and both pins go past the led and sensor on the torque board. the variations of the timing of the pins breaking the beam is how the ...
91 questions posted
Usually answered in minutes!
2 Questions