Hoover Floormax F5300 Upright Vacuum "turn stick" Questions

Ad

Question about Electrolux Vacuums

2 Answers

...stick vaccuum is lose and will not turn the brushes. Can not find a belt anywhere. www.totalvac.com/Electrolux vacuums24x7.com/ElectroluxParts Your not gonna find a belt because the belts on these ...

Ad

Question about Kirby Vacuums

1 Answer

...stick an awl or small screwdriver into the hole on the spindle sticking out the front of the vacuum. Turn the spindle to remove it so you can remove the fan. Install the new fan and reassemble the ...

Ad

Question about Shark Vacuums

2 Answers

...Stick Navigator won't turn on. Button to turn on is frozen. Vacumn won't turn on. Call cust. service. They send you a new machine, Same problem. I took it apart (take the battery our to be safe) and ...

...stick dyson DC59 smells like a wet dirty dog when I turn it on. I have pulled the filter out and washed it several times, Also if not careful blows dust all in your face. after you have washed the ...

Question about Eureka Vacuums

1 Answer

knob I cannot open the knob to put water. I don't remember if it pulls up or you turn it around. please help! The safety cap (knob) turns counter clockwise to open so you can put water in. Turn ...

Battery if charged and tests good. Why will Vacuum not operate? No lights turn on. Battery if charged and tests good. Vacuum will not operate. No lights turn on. Your on/off switch may be bad. Clean ...

Question about Electrolux Vacuums

1 Answer

turn. suction with the handheld unit it fine but when used as a floor sweeper it hardly picks up anything these stick mmachines do not have a tremendous amout of suction at the best of times but if it

Question about Electrolux Vacuums

1 Answer

The cleaning brush is not turning Turn the unit bottom up, Looking at the roller to the one side is a screw cover, you can use a dime to unscrew the cover and pull the roller unit out ans check for ...

turn the cap. Stick a flathead screwdriver in one of the slots of the nut holding the ball shell on to twist to remove the nut. Try to determine what is causing the resistance to the ball shell moving

Question about Dyson Vacuums

1 Answer

...the elbow at the end of the hose and i cannot figure out how to get that part seperated to pull the darn stick out. turn the vac upside down then stretch out the hose the stick will eventually fall ...

Not finding what you are looking for?
Hoover Floormax F5300 Upright Vacuum Logo

2 questions posted

Ask a Question

Usually answered in minutes!

Top Hoover Vacuums Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Brad Brown

Level 3 Expert

19187 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Are you a Hoover Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...