...reason is, there will still be heat coming from the cooker or grill after use. For that reason, the fan stays on for a bit afterwards. Its just a safety precaution so that the knobs dont get too
stove that is set up for natural gas but the owner tells me that if i want to convert to propane you just have to turn a dial. Is this correct? i have a whirlpool sf379leks super capacity 465 the oven
Question about Garland Kitchen Ranges
...Stove and Oven. The oven is not working right. We turn it on, smell gas, and it doesn't light. When we turn it off, the oven stays hot, and I see a red glow inside. The stove has 6 burners and they ...
stove eye it seems like that allows gas to start going to oven burner then oven will stay lit & new valve & regulator makes squealing noise Hi, Sound`s to me you need a new hot surface ignitor
Question about Kitchen Ranges
...stove with the smooth top? If so, the burners aren't actually turning off. They're red until they reach the right temp and then they go dark to maintain the temp. If they stayed red the temp would ...
...stove top works fine, so there is gas available. Looked for a "button on safety valve", as per suggestion of someone who solved a similar problem on a different oven, but no button or valve could be ...
...stove is 39' width you can set the amount of time for self clean that you want, you can also turn it off during mid cycle, but if oven is hot it will not unlock the door til it is cooled down enough, ...
...Gas Stove Top works... Oven and Broiler not working(Elec.) I replaced Electronic oven control assy...It works correctly, but never gets Hot!! Any ideas?? Having a problem with the stove on this Jenn ...
Question about Verona Kitchen Ranges
...gas-stove-ignitor/ Hope these help. Sounds like an issue with the thermocouple for that particular burner. Could be bad or just disconnected. You'll have to open the top of the range and check the ...
...gas stove with a 24" griddle. The gas was turned off during a remodel. Now the gas is back on and the gas burners work fine but I cannot get the oven pilot light to lignite--what am I missing? Laurel ...
10 questions posted
Usually answered in minutes!
11 Questions
11 Questions
1 Questions
6 Questions
3 Questions