Hoover U5450-900 Windtunnel Supreme Bagged Upright Vacuum "beaters wont work" Questions

wont pick up except thru hose or sometimes if you push down on sweeper have cleaned all the filters etc You have something stuck between the beater bar cavity and the hose connection, it's not a very ...

our Dyson upright vaccumms beater bar wont move. the vaccumm will **** up air but the bar underneath wont move. The gears are not working property. It could be the clutch that's causing the problem or

...wont work any more. how do i fix it brushbar moter won't work any more. how do i fix it. it got stopped by a sleeping bag cord. You need to replace the belt that drives the beater bar. It has been ...

WHY WONT BEATER BAR TURN AND FLOOR SUCTION WORK? PLENTY OF SUCTION FROM HOSE. The belt may be stretched and need replaced

...while i was using it. Now my ball dyson shut off while i was using it. Now it wont turn on at all. its about 6 years ols There is a reset button where the beater bar is. push that and it should

...WONT STAY ON. IS THERE A BELT I NEED TO CHECK We have only had our Navigator for 6 months and the bar won't turn. We took the whole beater bar head apart and it was a wiring problem in the beater ...

wont work at all until it is rewired. If your vacuum cleaner shuts off when you turn off the beater bar or try to use the hose, it's possible that there is a blockage or obstruction in the hose or the

NO SUCTION FROM MAIN PART OF VACUUM. THERE IS SUCTION FROM THE WAND You have a clog in the hose that goes from the head up to the intake of the cylider. Most likely right as it leaves the beater head.

...wont work,make sure the beater bar is spinning while on.If it is not the belt is broken and will need replacing.To do that remove the plate on the bottom and the beater bar slides out.There is a ...

i cleaned it out but it still wont **** into the dirt container it all ends up getting cloged in the opening on the bottom Double check the elbow at the base on the right hand side (back facing you) ...