lubricate-your-bread-machine-pan-shaft-bearing_W0QQugidZ10000000016577277 BTW, be careful of that rubber seal -- they are apparently irreplaceable! (I need one, if you find a source.) -Dave http://www
Lubricant for bread maker pan mixer shaft I have a ten year old Hitachi bread machine that still works fine, but I need to remove and clean the shaft. Last time I did this I used a standard white ...
I got a used oster 4812 bread machine from a friend. Making my first batch of bread and it seems the paddle is struggling a bit and there are occasional "squeaks" as if the internal gears ...
Question about Zojirushi Kitchen Appliances - Others
The spindles that you attach the paddles to is leaking a black lubricant or something like that. I was making a simple sweet dough. By the way, I NEVER bake in the bread maker. I only use it to knead ...
My bread machine is putting out oil in the bottom where the agitator is & it gets on the dough. Is my machine getting ready to break down ? HI, There is a sealed bearing on the bottom of the bread
Question about Breadman Kitchen Appliances - Others
the paddle keeps coming off during mixing and leaving a black stain in the dough Hi, The sealed bearing located on the bottom of the bread pan has failed. This bearing is sealed with lubricant to ...
Question about Breadman Kitchen Appliances - Others
bread machine arm will not turn except manually I recently purchased an older bread machine that was never used. It would beep but never turn no matter how long I waited or what cycle I chose. I took ...
Question about Black & Decker Kitchen Appliances - Others
First bread machine, one paddle would not spin, also black gunk accumulated under paddles - great customer service - bread machine replaced. 2nd bread machine, another malfunction - again, great ...
...lubricate it so that it will mix the ingredients. Hi, Take the bread pan out of the machine and see if you can rotate the paddle by hand. If you can't then the sealed bearing on the bottom of the pan ...
Welbilt ABM6000 Bread Maker Hi, I lifted my container out of the machine and the center post (that drives the mixing paddle) dropped out of the bottom. There must be something that holds it in but I ...
39 questions posted
Usually answered in minutes!
238 Questions
110 Questions
71 Questions
57 Questions
56 Questions