...wind tunnel belts? How do you change the Hoover wind tunnel vacuum cleaner belts? If you turn the vacuum over there will be (4) screws that hold on the base cover for the roller brush. Remove the ...
...Wind Tunnel vacuum cleaner runs for a minute or two then turns off. (It does not respond to the on-off switch on the handle.) It will start again after a few minutes. The side filter has been removed ...
...Wind Tunnel does not turn on We have a Hoover Wind Tunnel Mach 4.7 that is 8-9 years old. It will not turn on. We have not had any previous problems. Is there a reset button or is the motor just bad? ...
...wind tunnel vacuum turn on First of all you have checked to make sure you are plugging into a outlet that has power correct ? If you have power at the outlet then when you activate the switch does it ...
...Wind Tunnel bagless- issue with turning on I have a brand new hoover wind tunnel. while in the middle of vacuming it just turned off and now won't turn on agian. Ideas Have you tried to plug the ...
Question about Hoover Vacuums
wind tunnel vacum. And how to replace it. My brushes are not spinning. Why aren't the brushes on vacum are not spinning around? Its usually located underneath the body of the unit, turn it upside down
...Wind Tunnel My NEW Hoover 'Wind Tunnel # U 6637-960 will not work more than 20 minutes before the flat belt slides off the top pulley. Got new belts from Sears - no help If this is new, you have a ...
Wind Tunnel vacuum motor won't turn on The motor on my Wind Tunnel vacuum simply "turned off" while I was using it yesterday. I thought it had come unplugged, but that wasn't the case. I wiggled the ...
Question about Hoover Vacuums
...Wind Tunnel Self-propelled vacuum. I changed the belts because the brush was not turning. After replacing the belts the brush is still not turning what can be wrong? there are two belts on the wind ...
Question about Hoover Vacuums
...wind tunnel just quit while vacuuming. It is dead??? Two years old used about every other week? Any suggestions? Some Wind Tunnels by Hoover have a poor design in the switch on the handle. Sometimes ...
243 questions posted
Usually answered in minutes!
746 Questions
388 Questions
262 Questions
146 Questions